AIM Speaker options by
 

AIM7™ Series

Building on the success of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully pivoting baffle allowing the installer to toe-in the left and right speaker for better stereo imaging. They feature seven-inch woofers, a substantial improvement over the six-inch driver in the original MT6, as well as an offset, independently pivoting tweeter. They play louder, deeper and with more authority than the MT6 and at the exact same price.
 

AIM7™ Three

Pivoting and Rotating 7" Aluminum Cone Woofer
Pivoting 1" Aluminum Dome Tweeter
Timbre-Matched to AIM8 Three, CRS8 Three, CSS6 Three, MT8 Three, AIM7 MT Three, TIME Three, AIM Monitor 3, AIM Monitor LCR 3 and AIM LCR 3
Front Mounted Bass & Treble Equalization Switches
Efficiency: 91dB 1W/1m
Power Recommendations: 5 - 125 watts (undistorted)
Impedance: 8/6/4 ohms depending on switch settings
Frequency Response: 40Hz - 20kHz ± 3dB
Diameter x Depth: 9 7/8" x 5 1/8" (250.825mm x 130.175mm)
Cut-out Diameter: 8 1/4" (209.55mm)
 

AIM7™  Four

ASM82740
Pivoting and Rotating 7" Magnesium/Aluminum Cone Woofer
Pivoting 1" Magnesium/Aluminum Alloy Dome Tweeter
Timbre-Matched to AIM8 Four, CRS8 Four, MT8 Four AIM7 MT Four
Front Mounted Bass & Treble Equalization Switches
Efficiency: 92dB 1W/1m
Power Recommendations: 5 - 150 watts (undistorted)
Impedance: 8/6/4 ohms depending on switch settings
Frequency Response: 37Hz - 20kHz ± 3dB
Diameter x Depth: 9 7/8" x 5 1/8" (250.825mm x 130.175mm)
Cut-out Diameter: 8 1/4" (209.55mm)

AIM7™ Five
ASM82750
Pivoting and Rotating 7" Kevlar® Cone Woofer
Pivoting 1" Magnesium/Aluminum Alloy Dome Tweeter
Timbre-Matched to AIM8 Five and TIME Five
Front Mounted Bass & Treble Equalization Switches
Efficiency: 91dB 1W/1m
Power Recommendations: 5 - 150 watts (undistorted)
Impedance: 8/6/4 ohms depending on switch settings
Frequency Response: 35Hz - 20kHz ± 3dB
Diameter x Depth: 9 7/8" x 5 1/8" (250.825mm x 130.175mm)
Cut-out Diameter: 8 1/4" (209.55mm)